Aluminum Cover
Aluminum cover to protect floor heating lines at the header.
Backsplash
Custom Stainless backsplash for this wash station
Barrier
Aluminum barrier for inside a shop.
Fire Truck Modifications
Added a new rolling system for this new extension ladder. Removed existing spot lights, relocated pump muffler, and installed the Aluminum ladder system. One Pin to Pull to release ladder for quick removal.
Repairs
New fender/step and some floor sections replaced as well as a few other repairs.
Modifications
New structural overhang support installed at the RBC in PHK.
Side Steps
Custom Steel Rub Rails for this Hummer.
Repairs
Quick connects removed from damaged forklift frame and installed onto new frame.
Sign Holders
Collapsable Stop Sign Holder for fire department.
Modification
Custom Aluminum Outrigger Pad Holders.
Modification
Pump Stand Modifications by adding Steel legs.
Modification
Made new hitch mounting plate.
Truck Modifications
Installed a couple boxes on this truck.
Aluminum Posts
Set of Aluminum Posts to attach to a deck for an awning.
Landfill Nets
Built 5 Steel Garbage Nets for GFL to collect garbage when the wind blows.
Bedding Sifter
This bedding sifter is for cleaning stalls and cuts down on the labour. Helps sift manure with ease.
Aluminum Posts
Constructed a new set of posts for this sign.
Table Dividers
Aluminum table dividers to social distance in the restaurant. These replaced their plastic, non-sturdy, dividers.
Stainless Barrels
Our customer wanted 2 barrels welded together to create a floating platform. We've made 6 in total.
Battery Tray
Custom battery tray constructed for a tractor.
Drilled Well
Added an extension on this drilled well.
Custom Covers
These covers were made for deep fryers in a food truck. They are used to prevent oil from splashing while in transport.
Wishbone Locator
Welded up this wishbone locator for a drag car.
Live Edge
Custom live edge table/shelf that will go up against a wall. Left this one with natural wood & steel, with a few coats of clear on everything.
Smoker
Turned a gun safe into a smoker for a customer.
Door Gates
Made up a pair of security gates to go over these patio doors.
Screener
New compost Rommel screener at the Waste Management in Guysborough.
Dump Box
Installed a new hydraulic cylinder and power unit onto this flat deck. The customer will finish off his dump box, then it's ready for work.
Floor Drains
A set of floor drain inserts to accept a larger drain hose off an industrial floor scrubber.
Ramps
Made two 10ft Aluminum ramps with grit tape for traction.
Water Inlet
Constructed Aluminum Water Inlet Bulkhead. This will slide down into channel and added HDPE to protect the Aluminum from corrosion and make it slide easier for installation and removal.
Aluminum Guard
A customer was looking to protect his new light bar without losing any light. Made this Aluminum Guard to help prevent damage from happening to it.
Aluminum Mounts
Installed a new Aluminum mount that we fabricated for the Zamboni to stabilize the wider pipe they are using that increases the width of the spray for the ice surface.
Battery Box
Made this custom Aluminum battery box for Milford Haven Fire Department.
Cart Corrals
Repaired a bent cart corral.
Hydraulic Tank
New hydraulic tank for a customers wood splitter.
Cage
Had an NSCC Student in for a 2 week work term, she built this cage for when we transport porjects to get galvanized.
Gas Bottle Rack
Custom gas bottle rack for STFX University, plaque was cut out with CNC machine.
Knife
New custom wedge built from 5/8" hardened steel for wood processing.
Catch Tray
Aluminum catch tray to put water tank onto.
Aluminum Ladder
3-step Aluminum Ladder for a flat deck truck.
Catch Tray
Aluminum Catch Tray.
Steel Sign
Steel Sign built and painted for Starbucks in Antigonish.
Pylon Stands
Aluminum pylon stands for a local fire department.
Ball Field Drag
Built a drag for the ball field in Canso, NS.